About the 0-54201-2
The 0-54201-2 is a Dual Processor Automate Board created by Reliance Electric. This circuit board is rather large. The upper edge is marked out in increments of five from the number zero to one hundred and twenty-five. The side edge is labeled with the alphabet from A to Z then using double letters AA (going through the whole alphabet in the second letters spot), then goes to BA (and going all the way to M in the second letter spot). This circuit board has one small red LED light at the top edge by marker number twenty-five. The circuit board has fifteen small circular red condensers, one small brown condenser, and seven orange square shaped condensers. There are also two blueish green colored strip condensers near the top edge. The two black transistors. There are three sets of jumper pins. There are ten resistors or various colors. The circuit board has three black and silver diodes. The circuit board has two metal tabs on the top edge (the one labeled with numbers) that secure the circuit board in place. There is also a blue plastic ribbon harness connector at the top that goes from the thirty-five mark to the sixty-five mark. Along the bottom of the circuit board, there is a long pale colored plastic support that goes from the ten-grid line to the one hundred and twenty grid line, with a separate black section the same length underneath it. There are also fifty-five sections that hold programming information called microchips.