About the 0-54363
The 0-54363 is a frequency input card produced by Reliance Electric. This circuit board is a dual level card. With that being said you can’t see the first levels parts unless the second layer is completely removed. The parts on the lower level, however, are similar to the upper level. The circuit board uses transistors on the upper and lower level to amplify the signal. The circuit board uses various resistors on the upper and lower levels to remove energy from the circuit board. These resistors vary from resistors that have the resistance ability written on them or resistors that have multiple colored bands that corresponds with a chart that calculates how much they can resist. The circuit board uses didoes on the upper and lower level to direct the energy in a single direction. These components vary in color and shape, as a general rule of thumb, they are black with a light gray line on one end, white with a black line at one end, or orange with a black line at one end. Whichever side of the diode has the line that is the direction that the energy flows. There are various gold metal spikes on the upper and lower levels that are used to connect wires. There are thirteen black wires that come up from the lower level and connect to the left edge of the upper level. The upper level also has a large black plastic cut out attached to the curved corner. The levels are separated by four white stilts.
