About the 0-55325-80
0-55325-80 Inverter Regulator Board
The 0-55325-80 is a circuit board component from Reliance Electric. This is used within Reliance drive systems. The manufacturer has discontinued this particular component. While this board component most usually is fabricated by Reliance, it can sometimes originate from Baldor-Reliance. More rarely, it may be marked as an ABB (Asea Brown Boveri) component. 55325-80 will appear in the part id.
The 0-55325-80 functions as an Inverter Regulator Card. This is a smaller circuit board. It is drilled in all four corners to allow for mounting. The board has only a few components, some which carry reference designators or manufacturer codes. The board has several fields of terminal pins on its surface. Each pin is individually numbered. The pins are grouped by printed borders (boxes) on the board’s surface. These boxes are labeled such things as CN102, J1, CN103, CN113, 380, 415, and 460.
Other components on the 0-55325-80 include three stab-on connectors. These are labeled individually as (281,) (282,) and (283.) Together, they are labeled “Input Voltage Selector.” Above these connectors, the board has three MOVs, or metal oxide varistors. There is an additional stab-on connector on the opposite side of the board labeled “GND.” The board has two fuses mounted into fuse holders, a single metal film resistor, three 50v 2200 μf electrolytic capacitors, two bridge rectifiers, and two transistors.
The rear of the board is marked 802289-13A 192. More information regarding the operation or installation of the 0-55325-80 can be accessed through Reliance publications including data sheets, user guides, and product manuals. Safety and handling procedures are available through the same technical support publications.
