About the 0-57005
The 0-57005 is a remote operator buffer PCB circuit board. This circuit board is relatively small. The circuit board features seventeen hollow metal towers on the right edge of the circuit board. They are split into two sections, the top section having seven metal towers and the seventh tower being labeled with a twenty-eight (28), the second section has ten metal towers with the tenth tower being labeled with a thirty-two (32). The circuit board has six yellow capacitors labeled C1, C2, C3, C4, C5, and C6. The circuit board also has four mauve resistors with a dark red stripe, an orange stripe, two purple stripes, and another dark red strip, there is also a mauve resistor with a dark brown stripe, a bright red stripe, a white stripe, a thin light brown stripe, and a bright blue stripe. There are also three teal green resistors with a dark red stripe, a light brown stripe, and a pale purple stripe. The final resistor is also a teal green color but only has a bright red stripe and a light brown stripe. The circuit board has two small integrated circuits that are labeled M9152 LM 308 N in the tops. The circuit board also has two three screw terminal blocks, a terminal block with only two screws, and a terminal block with ten screws. The circuit board uses two metal lined openings in the center ant the upper edge of the board to be secured into place.
Allow AX Control to get you up and running.