About the 0-58710-1
0-58710-1 Terminal Assembly Board
The 0-58710-1 is a Reliance Electric component fabricated to be used in the company’s drive systems. These PCBs are sometimes shipped under the company names ABB/Asea Brown Boveri or Baldor-Reliance. If the board currently at your location is from one of these companies, and you have questions about compatibility with our Reliance listings, please reach out to the AX Control team today.
The 0-58710-1 is a long and narrow circuit board with only a few board components. It functions as a Terminal Assembly and allows multiple connections to be made on one board. This allows data to neatly transfer through many points in the system via this one board component. The board is factory drilled in each corner to allow for the mounting of hardware like standoffs or screws. It has three terminal strips lined up across its surface. Each of these terminal strips has two lines of screw connections, one behind the other. Each terminal strip is mated with a female multi-pin cable connector with screw connections. The board also has several terminal pins attached to the body of the board between the terminal strips.
The surface of the 0-58710-1 is marked with the board id and with the Reliance logo. The rear surface carries several other codes/pieces of information. For a more detailed description of components, or for step-by-step installation instructions, please refer to Reliance manuals or data sheets that refer to the 0-58710-1 board. Original technical support, live and written, was all provided by Reliance.
