0-58719-30

About the 0-58719-30

The 0-58719-30 is the printed circuit board assembly portion of the Field Current Regulator Kit for FlexPak 3000 series drives with a rated maximum motor field current of 4 amps or below.   This board may carry a secondary number of 707793-10R. 

The 0-58719-30 is a two-tiered board.  The two levels are connected together using standoffs.  The top board surface includes two vertical pin field connectors located on opposite sides of the board.  There are also multiple jumpers, two varistors, an IC package, two transformers, and several capacitors, resistors, and diodes.  The board also has fuses on this portion of the board.   The lower board is, for the most part, empty besides the standoffs.  Screws are mounted on the lower surface of the board to hold the board and the standoffs together. 

The 0-58719-30 weighs approximately 0.76 pounds before the addition of shipping materials.  As a static-sensitive board, we will ship this within an anti-static wrap or bag to protect it during transit. 

Field current regulator kits are designed for use within drives using software version 3.00 or later.  If your drive is using an earlier version of the software, consider upgrading before the addition of this part.  For regulator kits designed for other voltages, please see our inventory. 

AX Control services local and worldwide customers on a daily basis.  If you are local to us and would like to pick up your order at our facility, please contact us with your part list so we can have everything ready for you upon your arrival.