0-58719-42

Product Description

The 0-58719-42 unit is an output module board that was created and manufactured by Reliance Electric. The 0-58719-42 output module board is can typically be found within our stock here at AX Control. To check on the availability of, ask any questions about, and place an order for the 0-58719-42 output module board, please give us a call or send us an email. By doing this, you can speak to one of our sales representatives, who are here to help you along every step of the purchasing process.

The 0-58719-42 output module board is a small, rectangular circuit board with many electrical components and wires. There are four MOVs situated on the left half of the board. The top right MOVs are connected to each other using an adhesive substance. In addition to that, you will see a few small metal tabs, a larger diode, and two small resistors. On the right side of the board, there is a grouping of three small electrical parts: one resistor, one diode, and one capacitor. Next to this group, you will see a large transformer. Below this transformer in the bottom right corner of the board, there is a resistor that is much larger than the other three. Scattered throughout the 0-58719-42 output module board, there are many different kinds of wires that connect to other spots on the board.

When you are ready to install the 0-58719-42 output module board, use the four mounting holes that are provided. These holes are located in two of the corners of the board as well as in the middle part of the board.

In total, the 0-58719-42 output module board weighs approximately 0.91 lbs. or 0.413 kg.