0-60007-2

About the 0-60007-2

0-60007-2 Drive Power Supply Module

The Reliance 0-60007-2 is a Drive Power Supply module.  This is often used in high-power SA3000 modules with distributed power systems. The 0-60007-2 is rated 115 VAC.  Typically this is marked as a Reliance component, but it is possible that it may be marked with either the Baldor-Reliance or Asea Brown Boveri name and/or logo.   The part number will always reflect 60007-2.

The 0-60007-2 has a front faceplate attached to the circuit board portion of the module.  The faceplate is double-wide and has a green LED indicator mounted in its top left corner.   The bottom left edge is populated by a four position terminal strip with its own cover. A small indicator LED is located above this component.  The terminals on the strip are labeled L1/L2 115 VAC Input and L1/L2 115 VAC Output to Fan.

On the right side of the board, the 0-60007-2 is populated by five inductor coils, two heat sinks, a transformer, along with resistors, diodes, transistors, and capacitors.  It also as a SAF Series Air Velocity Switch rated 50 FPM. The left side is populated by a metal carrier that is populated by two transformers, an inductor coil, transistors, high-voltage capacitors that use several different materials, disk capacitors,  transistors, and resistors. This carrier also has a five-position connector with wired connections threaded through the back of the board. A right-angled connector is located along the rear edge of the board.

For more detailed information regarding board operation, please consult Reliance publications like data sheets and manuals.  Installation guidelines are provided in these publications as well. The AX Control team will be happy to help you with any questions about Reliance technical support publications during your order process.