About the 0-60017-A
0-60017-A PC Assembly Board
The 0-60017-A is a circuit board fabricated by Reliance Electric for use in the company’s drives. The board may be noted as a Baldor Reliance component, or possibly originating from Asea Brown Boveri.
The 0-60017-A is a rectangular circuit board with only a few components on its surface. Unlike many boards in this series, the board has no attached faceplate, no extractor clips, and does not have any kind of grid pattern printed on its surface. The board is factory drilled in each corner to allow the insertion of hardware like screws or standoffs for mounting.
The 0-60017-A has three fuse components mounted in fuse clips. These are placed side-by-side on the board. Above the fuses, there are three axial wire wound resistors mounted to the board. The board also uses metal film resistors and four other resistors of another type. There is a field of six diodes placed in the center of the surface.
All other components on the 0-60017-A are connectors. This includes a terminal strip in the upper left corner with three screw terminals, a male vertical pin header connector along the right edge, and multiple stab-on connectors. There are five stab-on connectors on the left edge and thirteen stab-on connectors along the bottom edge. The board has several bare copper traces.
For detailed information regarding the installation of this board within a drive system, please consult that drive’s user guide or the datasheet for the 0-60017-A. Product manuals and user guides from Reliance Electric will have more information regarding the operation of this board, along with important safety and handling guides.