About the 0-60027-3
The 0-60027-3 is an LPI Module board that was originally manufactured and distributed by Reliance Electric. This is one of several versions of the LPI, or Local Power Interface Module, available for the Automax system. Please be sure to order the correct unit for your needs. The Automax PLC system is a distributed control system that can provide ladder logic, BASIC, and control block programs. This system was originally sold under the Automate name.
The 0-60027-3 is a rectangular circuit board that does not include a front faceplate. The board weighs approximately 1.00 pounds before the addition of any sort of packing material like internal or external boxing, antistatic wrap, or padding. The board has been factory drilled in each corner and also has several other factory-made holes (some ringed with conductive material) located along board edges and within the center of the board.
The 0-60027-3 is designed with three sections that are very similar to each other. Each of these sections includes a right-angled connector along the top edge and a vertical connector at the bottom.) Each section also has a number of resistors, transistors, integrated circuits, and inductor coils. Each section also has a line of vertical pin connectors, while the right-most section has additional connectors along the outside edge of the board.
The board also has additional sections along the left side of the board that includes additional connectors, two LED indicators, and additional circuit board parts. It is important to note this is a high-voltage board that should be handled with extreme caution.
