About the 60023-1A
The 60023-1A is a Power Module interface board created by Reliance Electric. The faceplate of this card has a male terminal connector and a female terminal connector. The female connector is labeled JTII. There is a male terminal connector at the back of the circuit board as well. The power module has fifty black integrated circuits, five yellow integrated circuits, and five larger microcontrollers.
The 60023-1A has two large shot key diodes on the lower right corner, along with signal diodes around the board as well. The power module has seven small yellow suppressor capacitors, three yellow polypropylene capacitors and surface mounted ceramic capacitors. The circuit board uses various styles of resistors including two dark blue thick film resistors, two peach-colored fusible resistors, two yellow fusible resistors, along with a large amount of surface-mounted resistors. The card has a single crystal oscillator.
The 60023-1A has four blue short and small square towers and four yellow taller and larger towers on the left side. The circuit boards edge connected to the faceplate and the upper edge of the card has small tick marks and are labeled with numbers that are increased by five. The power module’s components each have an individual label of a number and letter next to the outline section where the part is to inform the engineer what the part is supposed to be.
Reach out to the talented and knowledgeable staff of AX Control to learn more about the 60023-1A, or to get a quote.
