About the 803624-18C
803624-18C PC Board from Reliance
The 803624-18C is a circuit board by Reliance. This board is typically used in the company’s drive systems. This component may sometimes come from Baldor-Reliance. It is also possible for it to originate from ABB/Asea Brown Boveri. This is due to changes in corporate structure and does not affect the part production quality.
Unlike many boards in this series, the 803624-18C does not have an attached faceplate. It is drilled at least once in each corner for mounting hardware like standoffs or screws. The board is marked off on the bottom and right edges by the half-inch. An X and a Y axis have been designated on the board’s surface. The board has a secondary board number of 58772-110AA.
The 803624-18C has three connectors on its surface. J1 is a right-angled male connector located in the left-bottom corner. J2 is a right-angled multi-pin connector at the center of the bottom edge. J3 is located in the upper right corner. This is a twenty-pin connector with two rows. The board has a single jumper switch (J4.) Other board components include nineteen integrated circuits, resistors and capacitors. The opposite surface of the board carries the codes 94V-0, IV-0, 1094, and 4654-1.
For more information regarding board installation or operation, please refer to Reliance publications like product manuals or data sheets. Reliance provided technical support for this and other PCBs in this series.
AX Control offers some of the most competitive prices in our industry. But if you want to save even more, talk to our team today about our surplus purchase and part exchange programs.
