About the PRO-200
The PRO-200 is a PC Board Module produced by Reliance Electric. The PRO-200 has multiple connection points around the outer edge. It features pin connectors with red plastic caps above the pins, a large orange connector, a large white and silver connector on the opposite edge from the other two connectors. The PRO-200 features a large number of different style capacitors. These capacitors range from small polyester capacitors to medium and large polyester capacitors, and bar-shaped capacitors. The PRO-200 also has a series of jumper pins that can be moved into two different positions. The module has various diodes including Zener and signal diodes. There is also a variety of resistors, such as carbon film resistors, thin film resistors, and metal film resistors. The PRO-200 also has a small blue box with eight surface switches. Above each switch, it is marked with a number one through eight, and below the switches, in the left edge it reads OFF. The PRO-200 uses about thirty-seven integrated circuits that range in size from small to large. There is also a large black box that reads DALLAS DS1225Y-200+ NONVOLATILE SRAM 0820D5-363318 + PHILIPPINES. The PRO-200 also features multiple areas around the circuit board to install additional components. Each area is labeled for what could be installed there and outlined to show the size that part needs to be. For additional detail please refer to the Reliance Electric instructional manuals and data sheets.
If you would like to order a PRO-200 please email or call AX Control.