About the S-25042
The S-25042 is an IRC2 PC BOARD created by Reliance Electric. This is another power rack style circuit board. The front panel has three red LED lights near the top left edge. There are also four raised metal pins that have a white plastic base. The three red LEDs correspond with three of the four metal pins. The light and their matching pins are labeled as follows 1 SET Value, 2 SET Value, and 3 SET Value. The fourth metal pin is marked COM. Towards the lower section of the front panel, there are nine screws on a standard terminal block. There are also three dials under the heading of LEVEL SET that are individually marked one, two, and three. Each dial has around it hash marks labeled zero through ten. Behind the front panel is the circuit board. The circuit board features three large power relays. In between the power relays and the front panel, there are three diodes and three red resistors. Behind the power relays are two black PCB mount electrolytic capacitors. The rear of the circuit board has many parts including twenty-two crystal diodes, six silver transistors, seven integrated circuits, ten blue and gray capacitor blocks, three red resistors, and forty-six tan fixed linear resistors. Each piece is labeled with a letter to identify it and a number to show how many are on the circuit board. For additional details see Reliance Electric's data sheets and manuals.
Reach out to AX Control by phone or email to order the S-25042 today.
