About the TLASB-5
The TLASB-5 printed circuit board from Reliance Electric is designed for use within the company’s various drive systems. This board is no longer available from the original equipment manufacturer but is typically in stock here at AX Control.
The TLASB-5 is a long, rectangular board without any sort of attached faceplate. While the board does not have extractor clips like many Reliance boards, it is designed with six standoffs built into the board's factory drilled holes located along its edges.
The TLASB-5 is populated with a number of different components including a two-digit LED display located halfway down one long edge. The TLASB-5 also has several individual light/LED indicators on its surface.
Other components include multiple potentiometers, jumper switches, and transistors. The board has three vertical pin connectors along one short edge and two additional connectors on the opposite edge next to a large terminal strip designed to accept wiring on its multiple screw mounts. There are also various resistors, capacitors, resistor network arrays, and diodes, along with integrated circuits, a DIP switch, and a single relay component. Most components are marked on the board with reference designators. The board itself is marked with the company logo and with the board number.
If you need additional information about TLASB-5, like a detailed description of proper installation techniques, or if you would like access to maintenance schedules, please refer to Reliance documents for this product like user guides, manuals, and data sheets. Our company may be able to help with replacement copies of these items if you have lost track of your originals. In-stock products typically ship the same day.
