About the AW0016-6437
The AW0016-6437 denotes a part from Reliance Electric. This is a servo drive circuit board for an ElectroCraft BRU-500 series system. AX Control also sells the BRU-500 series; if you require a full replacement for your drive, we can help with that.
The AW0016-6437 servo drive circuit board is a small component that weighs approximately 2.00 pounds. With the addition of proper packing and shipping material, your final shipping weight will be slightly higher.
The AW0016-6437 is a small and narrow board component. It has been factory drilled at several points along the board edge, and each of these factory drill holes has been ringed by a conductive material. The board has a single right-angled connector located along one short edge and also has a capacitor mounted to the board’s surface. The unit also has three square assemblies mounted to the surface of the board. These are marked E1, E2, and E3. The assemblies are each marked with various voltages along their bottom edge. Additionally, each one has a surface-mounted wire circling one exterior edge and bisecting its middle. Each wire ends in a round screw connector on one end and a bare wire on the other.
The AW0016-6437 is marked with a number of different codes that may help with wiring, as well as a revision code. Please refer to the original Reliance documentation for additional information. Reliance documents like datasheets, user guides, and product manuals will provide you with a deeper understanding of the product as well as provide you a full range of information about handling and proper installation.
