About the 10FN4032
10FN4032 is a non-regenerative 460 VAC FlexPak 3000 drive that is manufactured by Reliance Electric. Perform an armature voltage zero adjust and an analog tachometer zero adjust to start up the drive. The languages supported on the drive are English (default), Deutsch, Francais, Espanol, Italiano, and Code (Parameter Numbers). The password on the drive can be reset via the OIM. Program protection can be enabled and disabled. The memory options on the drive include Memory Save, Memory Restore, and Restore Defaults. The drive clock and fault alarms can be adjusted and reset. Active keys involved in changing parameters are ENTER, UP, DOWN, LEFT, RIGHT, CANCEL, and HELP. The Quick Start menu can be accessed from the main menu as a convenient guide for setting up the drive.
The steps in the Quick Start parameter modification sequence is as follows: 1) set the top speed parameter, 2) set the motor rated armature amps parameter, 3) set the maximum current parameter, 4) set the reverse disable parameter, 5) set the feedback select parameter, 6a) set the analog tach volts/1000 parameter, 6b) set the motor rated armature volts parameter, 7) set the acceleration rate parameter, 8) set the deceleration rate parameter, 9) set the minimum speed parameter, 10) set the maximum speed parameter, 11) set the jog acceleration/deceleration rate parameter, 12) set the jog speed parameter, 13) set the positive current limit parameter, 14) set the negative current limit parameter, 15) set the IR compensation parameter, 16) set the jumper information display parameter, 17) set the self-tune parameter (yes or no). The self tune setup involves adjusting the self tune bride, the self tune field range, and the self tune stability. Make the gain adjustments. Make the nominal A-C line adjustments.
