DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
❮
❯
AVAILABILITY:
CALL FOR AVAILABILITY
Manufacturer | Reliance Electric |
Series | FlexPak 3000 |
Part Number | 150FR4042 |
HP | 150 HP |
Input Voltage | 460 VAC |
Hz | 50/60 Hz |
150FR4042 is a FlexPak 3000 regenerative drive controller that is manufactured by Reliance Electric. Drive control options include run, jog, stop, reset, operational keys displayed, forward/reverse direction, auto/manual mode, control source, speed reference, configurable displays, percent load, motor current armature volts, motor speed, scalable speed reference, and 6 monitor display values. On the CS3000 computer cable, the 9-pin connector connects to the PC and the 25-pin connector connects to the FlexPak 3000 drive. With the CS3000 software, the user can edit, download, upload, control the drive, log faults and alarms, and scope the PC.
Available drive options include the NEMA 1 kit, the AC line disconnects kits, the blower motor starter kit, the 115V control interface, the 460 to 230 VAC conversion kit, the enhanced field supply kit, the field current regulator kit, the I/O expansion card, the Auto-Max network communication card, the ControlNet communication card, the DeviceNet communication card, the Interbus-S communication card, the Profibus communication card, the inverting fault circuit breaker, the line filter kit, the operator interface module (OIM) remote mounting kit, the V4.3 regulator upgrade, and the operator interface module (OIM) drive-mounted kit. The frequency output on the drive controller has a maximum frequency of 250 kHz, a duty cycle of 50%, an output voltage of 5 V differential, a 0.4 V maximum output offset, a 5 mA maximum load, a 100 Ω to isolated + 15 V common signal common, and a 100 Ω in series signal termination with 3900 pf.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $4760 |
Our highly skilled technicians can repair your 150FR4042. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved