DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
AVAILABILITY:
IN STOCK
SHIPS IN 3-5 DAYS
Manufacturer | Reliance Electric |
Series | FlexPak 3000 |
Part Number | 250FN4031 |
Input Voltage | 460 VAC |
HP | 250 HP |
Hz | 50/60 Hz |
250FN4031 is a 460 VAC non-regenerative FlexPak 3000 drive controller that is manufactured by Reliance Electric. This drive has a rated horsepower of 250 HP, unless a conversion kit is applied, in which case the rated horsepower is cut in half. The optional kit may add additional mounting depth to the drive’s mounting depth of 424.7 mm. The CS3000 is a Windows based software program which can be used to configure and operate GV3000/FlexPak 3000 drives from a personal computer. This software allows the user to create, store, upload, download, and print drive configurations; control the drive (start, stop, forward, reverse); monitor the drive status (faults, alarms, ready); drive metering (output speed, output current, etc.); monitor and change drive parameters in English instead of codes, compare drive and PC configurations, and read and reset the drive fault/alarm log.
File management on CS3000 drive software can be accomplished simply via the File and Configuration menus. The drive can be controlled via the following controls: Control Source Select, Forward/Reverse, Auto/Manual, Start, Stop/Reset, Jog, and Set Speed Reference. The Drive Control Panel displays output conditions such as: FlexPak 3000, Selected Reference, Motor Speed, Armature Volts, Motor Current, and Percent Load. The GV3000 settings for V/Hz are Selected Reference, Output Speed, Output Frequency, Output Amps, Output Volts, and Output kW. The GV3000 settings for vector are Selected Reference, Motor Speed, Motor Current, Motor Voltage, Motor Torque, and Output kW. This software is required to run the drive.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $4744 |
Our highly skilled technicians can repair your 250FN4031. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved