DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
❮
❯
AVAILABILITY:
CALL FOR AVAILABILITY
Manufacturer | Reliance Electric |
Series | FlexPak 3000 |
Part Number | 300FN4031 |
Input Voltage | 460 VAC |
HP | 300 HP |
Hz | 50/60 Hz |
300FN4031 is a Non-Regenerative 460 VAC drive manufactured by Reliance Electric as a part of their FlexPak 3000 series. The horsepower rating is 300 HP and the armature is 500 VDC. The field current is 300 VDC. The dimensions are 599 mm (23.6 in) x 850 mm (33.5 in) x 470 mm (18.5 in) x 822.8 mm (32.4 in) x 424.7 mm (16.7 in). The weight is 100 kg (220.5 lb).
Under the Quick Start menu, the default acceleration rate is 5 seconds, and the default deceleration rate is 5 seconds. The default minimum speed is 250 RPM. An alarm will be generated if the minimum speed is less than 10% of the maximum speed. The default maximum speed is 500 RPM. Do not allow the motor to exceed its maximum speed. The default jog acceleration/deceleration rate (the time it takes the jog mode reference to reach top speed) is 3 seconds. The default jog speed (the operating speed while the drive is in jog mode) is 250 RPM. The positive current limit is 150% FLA, and the negative current limit is 150% FLA (regenerative drives only). The IR compensation is 0% FLA. The OIM displays the correct jumper positions J18 395 for J11, J14 and J18. Verify that the hardware for these jumpers is positioned the same before continuing with Quick Start. Selecting YES on the Self Tune? Screen proceeds with the Self-Tuning procedure. Pressing NO returns the display to the main menu.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $4568 |
Our highly skilled technicians can repair your 300FN4031. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved