About the 914FK0101
914FK0101 is a FlexPak 3000 Drive I/O Expansion Kit manufactured by Reliance Electric. This expansion kit has 5 digital inputs, 2 digital outputs, 2 analog inputs, 2 analog outputs, 1 frequency input, and 1 frequency output. The input voltage is +24 VDC and the input current draw is 9 mA (a Vin=24 VDC). All inputs share the same common. The operating voltage for the digital outputs is 250 VAC (maximum) and 30 VDC (maximum). The switching current is 2 amps (maximum resistive) and 1 amp (maximum inductive). Analog inputs 1 and 2 have an input voltage of plus or minus 10 VDC. Analog outputs 1 and 2 have an output voltage of plus or minus 10 VDC. For the frequency input, the maximum frequency is 250 kHz, the minimum duty cycle is 25% at 250 kHz and 20% at 100 kHz, and the input is Differential A and A Not. For the frequency output, the maximum frequency is 250 kHz, the duty cycle is 50%, the output voltage is 5 V differential, and the maximum output offset is 0.4 V.
All interconnecting wiring must be sized and installed in conformance with applicable local, national, and international codes. Failure to observe this precaution could result in damage to, or destruction of, the equipment. Only qualified personnel familiar with the construction and operation of this equipment should install, adjust, operate, and/or service this equipment. Read and understand the instruction manual in its entirety before installing the expansion kit on the drive. Failure to observe this precaution could result in severe bodily injury or loss of life.
