About the 1AC2005U
The 1AC2005-U First Generation Three Phase AC VS Drive Controller has a 240 VAC, uses a blank chassis, has 5 HP rating, and is UL Listed. The controller also has a Local Operator’s Control Station on the front of the cabinet. The Operator’s Control Station in 1AC2005-U has a Run/IET LEDs feature. Among the features in the 1AC2005-U Controller are two LEDs, which are found at the Local Operator’s Control Station on the front of the cabinet. The two LEDs show the status of the drive (RUN) and a fault condition (IET).
The power line transients are prevented from harming the controller with the existence of line transient protection. The controller also has line-to-ground and line-to-line output short circuit prevention. The fuse is easy to replace since it is a standard fuse. The standard Local Operator’s Control Station extension for the Three Phase 1AC2005-U controller also enables functions such as the start/stop function and the run/jog control. Besides the basic functions, there are also additions to the controller that enable more functions. The kits that can be used alongside the Three Phase AC VS Drive include the Local Operator’s Control Station Kit, a Remote Operator’s Control Station, a Customer Interface Module Kit, a Dynamic Braking Kit, a Digital Meter with First Vault Indication, an extended Line Dip Module Kit, an Output Frequency Meter, an Output Ammeter, an Output Voltmeter, and a Cabinet Conversion (NEMA 1 to Chassis) kit.
