1V4160

About the 1V4160

The 1V4160 is a 1HP GV3000/SE Reliance Electric Drive drive. This drive may have been sold by Baldor Reliance or ABB depending on when its original production dates were.

The 1V4160 has the ability to be rated for vector or standard V/Hz regulation. It has a KVA of 2.0 and an input amperage of 2.5 with an output amperage of 2.1. It has a power loss of 60 watts full load. For this drive, it is recommended that a 6A rated fuse be used.

The 1V4160 is surrounded by a NEMA 1 type enclosure. This enclosure is vented and has an access door that allows the user to plug in an RS-232 communications cable without needing to remove the entire enclosure cover. This enclosure is supposed to be only used indoors. If you include the enclosure, this drive is 280.7 mm tall, 222.3 mm wide, 200 mm thick, and weighs 6.3 kg.

The 1V4160 has a keypad located on its faceplate. This keypad has quite a few vital components that help the drive perform functions that include programming and operating the drive. The display on the keypad is equipped with a 4-character, 7-segment LED indicator light. There are 14 single LEDs that can display the drive status and indicate the operating mode status of it. There are keys used for stopping, resetting, and starting the drive.

When mounting the 1V4160, it is possible to attach it to a panel. There are 4 mounting holes on the enclosure that can be used to attach it to the panel. The user should ensure that the bolts are thoroughly tightened so that the drive has a flat mounting surface. It is recommended to use washers under the bolt heads to keep the bolts as tight as possible.