About the 50V4060
50V4060
This unit is one of the several units available from AX Control Inc. in the GV3000 line of products. This line was originally built, produced, and distributed by Reliance Electric LTD. However, since then, the GV3000 series has been pulled from production by their electromechanical automation division.
The GV3000 series is a lineup of motor control units, operating as alternating current servo drive units. The GV3000 series is built for motor control over several types of systems, from simplistic units like fan or pump modules, to advanced, complex, and multi-layered systems such as web process networks.
This GV3000 drive is designated under the ID of 50V4060. It is rated to operate at 50 horsepower (HP), and requires an operational voltage intake ranging between 380 and 460 volts of alternating current. The 50V4060 is enclosed within a IP0 power module designed frame, which is rated with a NEMA 1 protective grade. This provides safety from invasive materials while the unit is operational. This prevents any dirt or excess water vapor from entering and damaging the internal parts.
As with many of the higher-powered drives from the GV3000 series of drives, this 50HP model can be prone to a number of inefficient and potentially damaging faults. One such fault that crops up quite often against the best wishes of the 50V1060 owner exists in the overcurrent at acceleration fault; represented on the built-in keypad display of this 50V4060 drive as the fault code OCA. This fault happens when an overcurrent condition occurs during deceleration, which is usually due to too short of a deceleration period. This fault can be patched through an increasing of acceleration time through parameters P.001, P.017, and P.021. For a more in-depth breakdown of GV3000 drive programming maintenance and common faults, please visit the official Reliance Electric software manual D2-3359-6.
The 50V4060 is available from AX Control Inc. and provide this model as both a brand new, never used surplus item, as well as a pre-owned, completely optimized and reconditioned unit. Our repairs are handled by our on-site technicians. We also provide a comprehensive warranty, which ranges from one to three years. All of our drives, AC, DC, and Servo, are covered for up to three years.
