About the GV3000E-AC044-AA-DBU
The GV3000E-AC044-AA-DBU is a Reliance Electric GV3000/SE AC V*S drive. It is possible that this drive was also made by Baldor Reliance and/or ABB at some point during its production years. This module may also be found under the alternate part number 896.11.12
The GV3000E-AC044-AA-DBU is a 44-amp 380-460 VAC, 3-Phase, and 50/60HZ. It has an AC input current of 53A without the choke and 47A with it. It uses a nominal 63A external fuse. It has a full load power loss of 600 watts. It has an output current of 43A and 22 kW at 400V and 2 kHz. It has a continuous braking power of 22 kW. It has a max P/U input voltage of 460 V.
The GV3000E-AC044-AA-DBU should be vertically mounted inside of a closed area like a locked cabinet or electrical room. It is in an IP20 enclosure. The environment around the drive should be kept from corrosive and combustible materials, liquids, and excessive dust. There are air vents covering the top and bottom of the drive.
On the faceplate of the GV3000E-AC044-AA-DBU, there are two terminal strips. There is also a slot for access to the female RS-232 9-pin serial connection port that is attached to the regulator board. There is a display panel and keypad on the drive faceplate. The display is actually attached to the regulator board that is directly behind the keypad. This display is a 4-digit 7-segment LED. There are 14 other LED indicators just below the display. There are nine keys on the keypad. These are labeled stop/reset, start, arrow up, arrow down, auto/man, prog, fwd/rev, run/jog, and enter.
