About the 5RM2750
The 5RM2750 model is part of the series HR500 series of motors. The HR500 motor was designed to be an industrial model, which includes numerous needed features to maximize the performance. To help the motor maintain a high inertia to torque ratio, the motor utilizes rare earth magnets. In order to accurately regulate position and speed over the entirety of the motor’s operating range, there is an optical encoder that is included in the motor.
The 5RM2750 motor is compatible with the Chassis Amplifier Model 5RA0750. The 5RM2750 motor’s motor enclosure is the TENV enclosure. The IEC Flange Mounting of the 5RM2750 motor is the FF145 and the Nom HP motor is 1. The base speed of the 5RM2750 motor is 2000 RPM. The 5RM2750 motor’s power rating is 750 Watts and the continuous torque rating is 31.7 lbs.
When utilizing the load horsepower or the continuous torque needed for the application as well as the base speed of the motor, take care to select the amplifier model numbers and the motor. After that, you must add the total power needed to run all the amplifiers available. After that, select the proper converters needed to give enough power to meet that specific amplifier’s requirements. When doing this, be sure to take any drives that do not operate concurrently into careful consideration.
With the 5RM2750 motor is an operation on single or three-phase 208/230 VAC and 50/60 Hz input. Also included for the customer's convenience is a remote fault contact and an automatic electronic shaft clamp that is activated whenever the input reference is set to zero volts.
