6MDBN-012102

About the 6MDBN-012102

6MDBN-012102 is a 200-240 VAC 3-phase input, 0-230 V 3-phase output MD65 drive that is manufactured by Reliance Electric. This drive outputs 2.2 kW (3.0 HP) and 12.0 amps. The input voltage range is 180-265, the input kVA is 5.5, and the input amps are 15.5. The branch circuit protection is 25 for the fuses and 25 for the circuit breaker. The power dissipation is 115 watts. On the integral keypad, the program key allows the user to enter and exit program mode. The up and down arrow keys allow the user to scroll through parameters and increase/decrease the value of a flashing digit. The potentiometer controls the drive speed. The stop key stops the drive if the drive is running, and the start key starts the drive if the drive is not running.

The RUN LED, when steady red, indicates that the drive is running. The FWD/REV LEDs, when flashing red, indicates that the drive has been commanded to change direction. The FWD/REV LEDs, when steady red, indicates the commanded motor direction. The VOLTS/AMPS/HERTZ LEDs, when steady red, indicate which unit applies to the displayed parameter values. The PROGRAM LED, when steady red, means that the drive is in program mode and parameter values can be changed. The FAULT LED, when flashing red, indicates a fault on the drive. The pot status LED, when steady green, means that the drive speed potentiometer is active. The Start key status, when steady green, means that the Start key is active on the integral keypad.