6MDEN-012102

About the 6MDEN-012102

The 6MDEN-012102 is a 10 HP MD65 Reliance Electric Drive.

The 6MDEN-012102 is 460-600 VAC, 7.5 kW, and 3-phase. It has an input voltage range of 414-660, a 14.9 KVA, and 13.7 amps. It has a rated output of 12.2 amps with a 200 watt power dissipation. This drive does not come from the factory with a filter and needs a 25 amp fuse. It is protected by an IP20/open-style chassis although there are kits (sold separately) that can convert the chassis to a NEMA 1/IP30 rated enclosure. The 6MDEN-012102 is 130mm wide, 180mm thick, 260mm tall, and weighs around 4.3 kg.

When mounting the 6MDEN-012102, it should be installed vertically on a flat level surface. This unit can be used in ambient temperatures somewhere between -10 to +50 degrees Celsius if there is a minimum of 25mm between the drives. If the drives are attached to the mounting surface directly next to each other, the maximum ambient temperature should only reach +40 degrees Celsius. This unit should be kept away from direct sunlight, corrosive materials, metal particles, moisture, and dust. To help maintain proper internal temperatures for the drive, there are air vents and an air circulation fan. On the back side of the drive, there are mounting brackets that can be used with M5 screws to secure it to its mounting surface.

There is a main user interface on the 6MDEN-012102 that has an LED display that is 4-digit and 7-segment, 10 small LED indicators, potentiometer dial, and 7 keys. This user interface can give the commands to the drive to start it, stop it, control its speed, change its direction.