14C225

About the 14C225

The 14C225 or 14C-225 is a Reliance Electric Test Meter Adapter Kit. It was mass-produced by both ASEA BROWN BOVERI and Baldor Reliance. This kit has since been discontinued by all manufacturers.

The 14C225 is an accessory for the FlexPak Plus and MiniPak Plus. It is used for the monitoring and measuring of regulator voltage. This kit acts a go-between the regulator module and a voltmeter.  The multimeter used for this device should be tuned to a minimum sensitivity of 20,000 ohms per volt.  The Test Meter Adapter Kit fits securely into the left-hand corner of the Regulator Module Kit. Lowering the kit over the nine pins on the Regulator Module, you can further secure the Test Meter Kit into place using the mounting screw that was provided in the kit.

The specific instruction manual for the 14C225, the D-3970-1, should be read before installation of this device to prevent injury or damage to the device. Power to the controller unit and cabinet should also be severed before installing this kit. You can also check the diagrams for the normal operating voltages standard for your device.

Ax Control offers a variety of shipping options to send the 14C225 to you when it is in stock. If you need this device shipped quickly, please feel free to contact us directly via phone call or email directly to discuss expedited options. We do offer competitive rates for shipping based on our volume and will be happy to give you specific quotes.