Product Description
The 4RC053 unit is a 3CN encoder cable that was that Reliance Electric designed and distributed to be part of their HR2000 series of high performance drive systems. Reliance Electric no longer offers this product new, but AX Control continues to stock it. You can email or call us to check on the availability of the 4RC054 encoder cable during the week between 8:00 a.m. and 5:00 p.m.
The 4RC053 encoder cable is a 5 foot long cable that ranges from 1 to 15 HP. It is meant to be used in conjunction with the 5 feet long sequencing cable with the model number 4RC054. When used together, these cables fulfill the controller connector to terminal board cable. These cables are used to sequence signal and to terminate controller feedback to a terminal board.
The HR2000 controller has many different features that make it accessible for users of any experience level. It has a three phase operation with a VAC of 208/230. The input is rated at 50/60 Hz. You can control the speed with great precision from base speed down all the way to zero speed. There is built-in line transient protection, which helps prevent power line transient from causing any harm to the control. The HR2000 controller has increased reliability based on the regulator that is single board hybrid based. In addition to all of those features, there is also serial pulse input reference that can be activated when you are operating it as a position regulator.
