45C995

About the 45C995

Reliance Electric was responsible for creating the 45C995 analog output module, which was a part of their Shark XL series. The 45C995 analog output module can, in most cases, can be purchased from AX Control although it is not being produced by the original manufacturer currently. You can ensure that this product is in our inventory by either calling us or email us or by using our website.

The 45C995 analog output module is closely related to the 45C993 module, which can also be found on AX Control’s website that can be accessed by clicking the link. These two analog output modules are almost identical other than the amount of channels present on them and the average current consumption rate of the channel that is labeled as Channel 3.

This product has four channels. The 45C995 module’s current range is between 4 and 20 mA and its load impedance is between 0 and 500 Ohms. It has an 8 bit resolution with conversion time of 1 millisecond and an overall accuracy of +/-1%. The 45C995 analog output module is not isolated from DC inputs and there is no present isolation with the device’s outputs.

For the 45C995 module’s current consumption rate, the average for the Channel One is 50 mA, the average for Channel Two is 0 mA, and the average for Channel Three is 250 mA.

Looking at the front of the modules, you will see all of the terminals that are designed for connecting the analog output devices. The C terminals on the faceplate are to be used for the commons.