About the S12-104P0LU
S12-104P0LU is an AC SP120 drive that is manufactured by Reliance Electric. The voltage rating is 115 VAC for this single-phase drive. The enclosure type is a protected IP20 chassis. This drive includes a keypad. The output current is 4.0 A. The horsepower is 1.0 HP (0.75 kW) at 230 V. There are a number of LED indicators on the front panel of the drive. The POWER LED is on when power is applied to the drive. The RUN LED is on when the drive is in operation. The PRG LED is on when the drive is being programmed. The Hz LED is on when the output speed is being displayed. The A LED is on when the output current is being displayed. The start key LED will be on when the start key has been pressed. The speed pot LED will be on when the speed pot is active.
To prolong the drive life and performance, store the drive within an ambient temperature range of -25°C to 70°C. Store within a relative humidity range of 20 to 90%, non-condensing. When operating the drive, keep it protected from moisture and direct sunlight, and keep the operating temperature between -10°C and 40°C. If the user would like to operate the drive between 40°C and 50°C, reduce the carrier frequency to 2 kHz, reduce the output current to 80% of the drive’s rated current, and remove the debris cover from the top of the drive. It is important to remember that the drive and enclosure rating is only IP20 when wired for 3-phase input power, not when it is wired for single-phase input power.
