S12-20010LU

About the S12-20010LU

S12-20010LU is an AC SP120 drive that is manufactured by Reliance Electric. The voltage rating is 230 VAC for this drive. The enclosure type is a protected IP20 chassis. This drive includes a keypad. The output current is 10 A. The horsepower is 3.0 HP (0.4 kW) at 230 V.

For the programmable digital input functions, no two inputs can be programmed for the same function, and the PTC input (setting 19) is only programmable on input terminal 5. Inputs do not require a voltage transition (cycle) after a fault condition is cleared, after input power cycling, or after programming the logic of the digital input. Alpha setting FW is the Forward function. Alpha setting RV is the Reverse function. Alpha settings CF1, CF2, CF3, CF4 are the preset frequency input functions. Alpha setting JG is the Jog function. Alpha setting 2CH is the 2nd acceleration/deceleration ramp function. Alpha setting FRS is the coast to stop function. Alpha setting EXT is the external fault function. Alpha setting USP is the unintentional start protection on power up function. Alpha setting SFT is the program lock function. Alpha setting AT is the 4-20 mA select function. Alpha setting RS is the reset function. Alpha setting PTC is the PTC input function. Alpha setting STA is the 3-wire run function. Alpha setting STP is the 3-wire stop function. Alpha setting F/R is the 3-wire forward/reverse function. Alpha setting UP is the remote control up function. Alpha setting DWN is the remote control down function. Alpha setting OPE is the run command source select function.