About the S20-402P0B1000
Reliance Electric manufactures S20-402P0B1000, an SP200 AC drive with a 3-phase 380-480V input and a 3-phase 460V output. This preset speed drive is rated 1.0 HP. The rated input current is 2.4 amperes, the rated output current is 2.0 amperes, and the fuse rating is 6 amperes. The circuit breaker rating is 4 amperes, and the typical power loss is 30 watts. There are many fault codes that may appear on the drive when faults occur. The Under Voltage, Over Voltage, Drive Overload, Motor Overload, Over Temperature, and Over Current faults are all auto resettable. For more information on faults, refer to the drive manual.
The SP200 drive has been tested to meet Electromagnetic Compatibility (EMC) Directive 89/336/EEC when installed as described within the Electromagnetic Compatibility section in the user manual. Conformity of the entire system is not guaranteed by conformity of the SP200 drive to EU directives. Install the drive in a protective enclosure which restricts access to IP rated devices as required by national and local codes and regulatory agencies. Both the manufacturer and end user must conform to EMC standards, particularly if the end user modified the machinery. Install the SP200 drive with the associated input mains filter to comply with said EMC standards. The Low Voltage Directive 72/23/EEC requires that the user follow all general precautions and ATTENTION statements throughout this manual, provide an earth ground connection to the PE terminal, and install the device in a protective enclosure.
