About the S20-403P5C1000
Reliance Electric manufactures S20-403P5C1000, an SP200 AC drive with a 3-phase 380-480V input and a 3-phase 460V output. This Dual Channel Analog drive is rated 2.0 HP. The rated input current is 4.1 amperes, the rated output current is 3.5 amperes, and the fuse rating is 10 amperes. The circuit breaker rating is 7 amperes, and the typical power loss is 50 watts.
The command frequency is 0.1 Hz (range 0-240.0), the output frequency is 0.1 Hz (range 0-240.0), and the output current is 0.1 A (range 0-200 % of rated current). The bus voltage is 1 V with a range of 0-1000. The fault code is “Annn,” which is an alphanumeric code. The analog input for 1 unit is 0.1% with a range of 0-110.0. The analog input for 2 units is 0.1% with a range of 0-110.0. The input status is a decimal with a range of 0000-7111. The drive rating is also a decimal.
The configurable output default is 0, which indicates no fault on the drive. Other possible configurable outputs include “1”: no fault/auto restarting, “2”: run, “3”: at frequency, “4”: above frequency, and “5”: above current. The configurable output level default is 0.0 but can go as high as 999.9 when the configurable output is either above frequency or above current. The main speed reference default is 0, which indicates preset speeds on B drives and analog input 1 on A and C drives. Other main speed reference indicators include “1”: keypad, “2”: internal/Jog frequency, “3”: analog input 2 (only available on C drives), and “4”: process operation output (only available on C drives.
