About the S20-LK1
The S20-LK1 unit is a local keypad that was designed and manufactured by Reliance Electric for the SP200 series. Even though the S20-LK1 keypad has been discontinued by the original manufacturer, you can typically find it within AX Control’s stock. To inquire about the availability of the S20-LK1 keypad, be sure to give AX Control a call so that you can talk with a sales representative.
The S20-LK1 keypad is a local keypad, which is mounted directly onto the SP200 system for operation and adjustments. This differs from the two other kinds of SP200 keypads, which are the S20-RK1 remote keypad and the S20-CK1 CopyCat keypad. The remote keypad is used for when the user needs permanent flush mounting of a keypad and the CopyCat keypad is for when the user needs to set up multiple drives using the same parameters quickly. Be sure to choose the correct keypad for your intended use. If you need assistance, you can contact one of our sales representatives.
The S20-LK1 keypad has a 4 character LED display screen. This display screen is tasked with showing the user relevant parameter and display values. There are a total of six buttons on the S20-LK1 keypad. These buttons are very large and easy to read. Two of these buttons are used to control the power of the device, two are used to cycle between different selections on the display (up and down arrows), one is labeled as the “PROG” button, and one is an enter button. Below the buttons, you will see two LED status indicators that are labeled as “RUN” and “PROGRAM.”
The S20-LK1 keypad has a total weight of about 0.13 lbs. or 0.059 kg. This total does not reflect the product plus the packaging materials that it will be housed within as a shipment.
