1SU54010

About the 1SU54010

1SU54010 is an SP500 Reliance Electric drive controller that can either be a 4 KHz, 6 KHz, or 8KHz carrier. The horsepower for this drive is 10 HP, which much match the associated motor(s). The enclosure is a NEMA 4X (Indoor Only)/NEMA 12. Contact AX Control if you have any questions regarding your device. AX Control may be reached by email at sales@axcontrol.com, or by phone at 1-919-372-8413. Click the links above for information about the AX Control Comprehensive Warranty and Exchange Program. For pricing information about this controller, click Request a Quote. For repair information about this controller, click Request Repair.

A three-phase (single-phase) A-C power source operates the SP500 drive controller. The power source enters the controller’s input terminals and passes through three suppressors. These suppressors limit voltage transients within the maximum voltage rating of the diode module. The diode module rectifies the incoming A-C source to a constant D-C voltage. The internal power supply and a large D-C bus capacitor receive the D-C bus voltage. To provide the necessary voltage and current source required within the controller, the internal power supply is a D-C to D-C type. The large D-C bus capacitor filters the D-C voltage which then enters an insulated-gate bipolar transistor inverter bridge. The IGBT transforms the constant D-C voltage into a pulse-width modulated (PWM) voltage signal corresponding to the variable voltage and variable frequency source selected for the motor. Using a 4, 6, or 8 kHz carrier frequency, the IGBT inverter bridge is switched by the microcontroller.