About the VCIB-85A-65A
VCIB-85A-65A
The Vectrive AC Servo series is a lineup of drives. These drives were developed and manufactured by Reliance Electric Ltd. The drives produced in this lineup are designed as vector regulation and management units. These drives are designed for a wide variety of uses in all manner of industrial settings.
This unit in particular is listed as the VCIB-85A-65A module. The Vectrive AC Servos are outfitted internally with such standard component parts, like the inverter and converter units, and a motor as hardware portion. In terms of the model’s standard software, the VCIB-85A-65A comes installed with a software known as “Zterm.” It is a Windows based software program, developed to run vector applications. It is also able to interfaced on a connected host computer, or via the VCIB-85A-65A’s operator terminal.
In addition to this, these servo drives are designed with a regenerative resistor module, as well as a pre-charge resistor, a set of fusing, and a cooling unit. The ambient temperature of these models is a standard range of 0 to 50 degrees C.
Functionally, the VCIB-85A-65A has an intake voltage level between 200 and 220 volts. The additional supply power is 11 amperes.
This unit has the Vectrive AC Servo standard measurements: 15 in x 15 in x 19 in (381 mm x 381 mm x483 mm).
The VCIB-85A-65A is available from AX Control Inc. as a part of our used, refurbished, and repaired devices in stock. All of our material has been completely optimized by our technicians, and is granted protection by our automatic warranty.
