About the UVZC-3202
The UVZC-3202 is a Reliance Electric created Inverter Unit for the VZ3000 Series. This series of parts may have possibly been mass-produced within the Baldor Electric or ABB manufacturing lines, but it is now discontinued. Although it’s a little hard to find now, AX Control still strives to keep the UVZC-3202 stocked.
The UVZC-3202 has a power supply with class 200 voltage. It is 3-phase, 14 amps, and is 2.2 kW. This unit has a 0-230 and 0-120 Hz output with a 50/60 Hz and 18/260 VAC input. It is protected by a 7 kg and 120mm wide x 430mm tall x 270mm deep chassis. This unit has a 5 kiloamp short circuit system rating. The motor recommended for the UVZC-3202 is the VMGW200215. This unit uses basic software SF-LK002BB. It has a comm baud rate of 9600 and a carrier frequency of 5 kHz.
There is a front cover on the UVZC-3202 that can be separated from the main portion of the chassis to grant the operator access to the outer components that are protected underneath it. Two retaining screws on the cover should be unscrewed to remove the front cover. Beneath the cover is a lamp indicator labeled power, a main terminal strip that has 11 terminals, a control circuit terminal strip with 6 terminals, and an overheat fault output terminal strip with 2 terminals. To the side of the cover are 5 lamp indicator lights, an LED monitor indicator, 2 drop numbers, 3 comm ports, 2 PG input/output ports, and a control signal port.
The instruction manual for the UVZC-3202 is the Reliance Electric #32023
