3090-SCCT063

About the 3090-SCCT063

Produced and shipped by the company Square D to be included into the PowerLogic 3090 series, the 3090-SCCT063 model is classified as the Split Current Transformer.

The 3090-SCCT063 transformer is within the 3090 SCCT sub-series of the PowerLogic 3090 series. The 3090 SCCTs are grade-five Ampere split-core current transformers which have secondary amperage rating, which is directly proportional to the transformer’s primary current level. The 3090 SCCT transformers have a variety of applications, including the following: power sensitive process, energy and power management, data logging, and equipment monitoring. Ideally, the 3090 SCCT transformers will be used with PowerLogic transducers, circuit monitors, and power meters. The 3090 SCCT sub-series is a cost-effective, convenient method of transforming electrical service Amps from its original level to a 0-5 Amp level, and that particular level with most monitoring equipment.

The 3090 SCCT transformers all have an insulation class rating of 600 VAC. However, please not the following: Do not overload the 600V Class current transformers by applying them to a phase-to-phase voltage that is greater than 600V; however, you can do this if you have adequate extra insulation applied from the primary conductor to the current transformers.

The 3090-SCCT063 specifically, according to the 3090 SCCT transformer section of the PowerLogic 3090 series’ manual, has a sensed Amperage rating of 0 to 600A AC, a compatible ratio of 600:5, a burden capacity rating of 5VA, and an F.S. accuracy rating of 1%. Additionally, the 3090-SCCT063 model’s housing size is size 3, which equates to having the dimensions 4.9” x 2.89” x 2.45” x 1.13” x 5.2” x 5.91”.